Siemens sl2 141 manual

SIEMENS SL2-141 USER MANUAL Pdf Download. - ManualsLib

After that you can to your Open Wrt interface with your browser on

Siemens SL2-141-i OpenWrt

If you have issues flashing the new Firmware via the webinterface (snature error) try logging in via serial console and flash the image via tftp.

How to to the <i>Siemens</i> <i>SL2</i>-<i>141</i> - SetupRouter

How to to the Siemens SL2-141 - SetupRouter

The stock firmware seems to skip checking the snature when flashing via tftp GET.

Download Manual for the Siemens SL2-141 - SetupRouter

At time of writing, it is not straht-forward to run Open WRT on this device due to strict checks of the image format and board ID (RTA1025BW_16) See also But you can change the Board-ID using cfe-environment and serial console, then you can use the RTA1025W-Builds, e.g. system type : RTA1025BW_16 processor : 0 cpu model : BCM6348 V0.7 Bogo MIPS : 239.20 wait instruction : no microsecond timers : yes tlb_entries : 32 extra interrupt vector : yes hardware watchpoint : no VCED exceptions : not available VCEI exceptions : not available CFE version 1.0.37-6.8.5 for BCM96348 (32bit, SP, BE) Build Date: Tue Jan 2 CST 2007 (michaelc) Boot Address 0xbfc00000 Flash Conf: CS0(1fc00009,1f), Base(bfc00000), Size(4MB) Ethernet Switch Mode 00000000 [email protected] 8 Board IP address : Host IP address : Gateway IP address : Run from flash/host (f/h) : f Default host run file name : Default host flash file name : bcm Model Name_fs_kernel Boot delay (0-9 seconds) : 1 Board Id Name : RTA1025BW_16 Psi size in KB : 24 Number of MAC Addresses (1-32) : 4 Ethernet MAC Address : :e3:xx:xx:xx Serial Number : Memory size in MB : 16 C Thread Number : 0 ==== Press space key to stop auto run (1 seconds) ==== Auto run second count down(before hit space key): to use current value Board Id Name (A-Q) RTA1046VW -------- A RTA1046BVW -------- B RTA1052VW -------- C RTA1052BVW -------- D RTA1052V -------- E RTA1052BV -------- F V2091_BB -------- G V2091 -------- H V2090 -------- I V2110 -------- J V2500V_BB -------- K RTA1025W_16 -------- L RTA1025BW_16 -------- M RTA1505W_16 -------- N RTA1505BW_16 -------- O RTA1046VW_32M -------- P RTA1046BVW_32M -------- Q :[M]: L Number of MAC Addresses (1-32) :[4]: Ethernet MAC Address :[:e3:xx:xx:xx]: Serial Number :[]: Save and Exit (y/n):y Save your new confuration to nvram.......Press any key to reset the board: You have to choose ' L' instead of the predefined ' M' to switch to Board-ID RTA1025W_16!

Siemens sl2 141 manual:

Rating: 94 / 100

Overall: 99 Rates